This is our NEW Leather Belt made with Merlot Mesa (Oxblood color) Leather! The SB Foot Tanning Co. makes this beautiful Full Grain Oil-Tanned leather. This leather is water, stain and perspiration resistant, and has a more natural look and feel. Our belts are backed with another layer of thick leather from the same tannery and stitched together with bonded nylon thread. This makes for a thick and heavy belt (roughly 5 mm thick). (NO RETURNS, NO EXCHANGES ACCEPTED because EACH BELT IS CUSTOM MADE TO ORDER, Please Measure a belt you own as explained in Step 1, you are welcome to ask questions if not sure).
*Made in USA
*Merlot Mesa (Oxblood color) (Full Grain Oil-Tanned Leather from the SB Foot Leather Tannery in Red Wing MN, USA)
*Your Choice of Buckle (Roller buckles require the included leather keeper but center bar buckles don't need it)
*Your Choice of buckle attachment (Chicago screws allow you to change the buckle, Copper Rivets are permanent and do not allow you to change the buckle)
*We normally space the holes 1 inch apart (message us if you want different spacing or extra holes)
*Fits 1.5" wide buckle (I'm happy to make other widths, Please message us at email@example.com)
Sizes: 30", 31", 32", 33", 34", 35", 36", 37", 38", 39", 40", 41", 42", 43", 44", 45", 46" (IF YOU DON'T SEE YOUR SIZE please contact us so we can make another custom size for you if needed.
*** IF YOU ARE IN BETWEEN SIZES WE RECOMMEND TO SIZE UP
********PLEASE NOTE: WE DO NOT ACCEPT RETURNS or EXCHANGES ON SIZING MISTAKES because EACH BELT IS CUSTOM MADE TO ORDER.
***To determine your belt size please follow these instructions carefully:
Step 1: Take your current belt and measure from the fold at the buckle end to your favorite hole. (PLEASE NOTE: These instructions only apply if your current belt has a "tongue buckle" (like the buckles pictured above). Otherwise please message us for instructions on how to measure better.
*** PLEASE NOTE THIS EXCEPTION, Narrow or thin belts: Because our belts are thick, if you are measuring a belt that's skinny or a belt that isn't very thick you'll want to add a little to the length for the new belt (please feel free to message us with questions at firstname.lastname@example.org). IF YOU ARE IN BETWEEN SIZES WE RECOMMEND TO SIZE UP
Step 2: (Please DO NOT SKIP Step One)
Step 2 is only used to double check your Step 1 belt measurement by comparing it to your pants size: generally your belt measurement will be 2" more than your pants size but please note that this is not always accurate because pant sizes vary from brand to brand so the best way to find your belt size is by measuring a belt you currently use as we explained in Step 1. IF YOU ARE IN BETWEEN SIZES WE RECOMMEND TO SIZE UP