Black Cherry-EXCALIBUR Leather Belt

• Black Cherry-EXCALIBUR is a New Leather from the SB Foot Leather Tannery in Red Wing MN, USA that has a polishable semi-aniline surface made with Wet Stuff Retan, finished to a medium to bright luster. This leather is smooth to the touch with a slight waxy feeling.  It has a slight pull up effect that allows you to see the undertones of the leather as the belt breaks in. The result is a beautiful, classic-looking leather that adds elegance to your belt. We back our belts with another layer of quality leather in a complementary color and stitch together with bonded nylon thread.  NO RETURNS OR EXCHANGES, ALL BELTS ARE CUSTOM MADE TO ORDER (Please follow instructions before ordering)

• Choose your buckle (Roller buckles include leather keeper but center bar buckles don't) We have added NEW buckle options: Real SOLID COPPER Center Bar & SOLID COPPER Roller Buckles for an additional cost of $12.00 each (See Pictures)
•  

• Choose your attachment: Chicago Screws or Copper Permanent Rivets (Permanent Rivets do not allow you to change the buckle) 

• Hole spacing: 1 inch apart (message us if you want different spacing or extra holes) 

• Belt total thickness 4.5mm-5mm 
• Made in USA

Step 1: 

 Take your current belt and measure from the fold at the buckle end to the hole you use most,  this hole will become the middle of 5 holes spaced at 1" apart on your belt. (Please use a Soft Measuring Tape to better follow your belt, used belts tend to curve with time so following that curve is important to get a more accurate measurement).  This only applies to belts with a tongue (like those pictured) not "rodeo style" buckles (Please contact us if you plan to use a different style buckle).  If you don't see your size offered or half-sizes please feel free to contact us. 

*THIN or NARROW* Belts can also affect the measurements, so please add to the length if the belt you are measuring is very thin.

Step 2: (Please DO NOT SKIP Step One):

 Step 2 is only used to double check your measurement from step 1 by comparing it to your pants size: Your belt size is generally  2" more than your pants size (Applies to **MEN'S Pants Only), but this is not always accurate because pant sizes vary from brand to brand. 

  IF YOU ARE IN BETWEEN SIZES WE RECOMMEND TO SIZE UP.