Hawthorne Muleskinner Leather Belt
Processing...

Hawthorne Muleskinner Leather Belt

Code: HTM-Belt


$57.00

Product Details

Hawthorne Muleskinner Leather Belt - Full-Grain SB Foot Leather - Made in USA

Hawthorne Muleskinner is a premium roughout leather from SB Foot Tannery in Red Wing, Minnesota. This leather is made using a reverse-suede technique that showcases the flesh side while retaining the strength and durability of full-grain leather. Unlike split suede, the hides are not split or thinned, resulting in a rugged leather with excellent durability and character.

Each belt is backed with a second layer of thick leather in a complementary color and stitched with bonded nylon thread for long-term durability.

NO RETURNS OR EXCHANGES - ALL BELTS ARE CUSTOM MADE TO ORDER (Please follow instructions before ordering).

  • Choose your buckle (Roller buckles include a leather keeper; Center-bar buckles do not).
  • NEW Heavy Weight buckle options: Solid Copper Center-Bar, Solid Copper Roller Buckles and Solid Brass Roller (+$12 each). Due to the increased distance between the belt fold and the roller, heavy roller buckles typically fit about one hole larger than our standard buckles. For the same fit, order one size smaller.
  • Choose your attachment: Chicago Screws or Copper Permanent Rivets (Permanent Rivets do not allow buckle changes).
  • Hole spacing: 1 inch apart (message us for different spacing or extra holes).
  • Standard belt width: approx. 36mm (1.42") fits a 1.5" buckle. Thickness varies from approx. 4.5mm to 5mm.
  • Made in USA.
Sizing Instructions:
Step 1: 
 Take your current belt and measure from the fold at the buckle end to the hole you use most,  this hole will become the middle of 5 holes spaced at 1" apart on your belt. (Please use a Soft Measuring Tape to better follow your belt, used belts tend to curve with time so following that curve is important to get a more accurate measurement).  This only applies to belts with a tongue (like those pictured) not "rodeo style" buckles (Please contact us if you plan to use a different style buckle).  If you don't see your size offered or half-sizes please feel free to contact us. 
*THIN or NARROW* Belts can also affect the measurements, so please add to the length if the belt you are measuring is very thin.
Step 2: (Please DO NOT SKIP Step One):
 Step 2 is only used to double check your measurement from step 1 by comparing it to your pants size: Your belt size is generally  2" more than your pants size (Applies to **MEN'S Pants Only), but this is not always accurate because pant sizes vary from brand to brand. 
  IF YOU ARE IN BETWEEN SIZES WE RECOMMEND TO SIZE UP.

-
+